Description
SNMG120412-PR External Turning Tools
Description
Model: SNMG120412
Chip breaker groove code: PR
Material: P
Material code: 9008, 9018.
Advantage: Wear resistance
Coating: CVD coating
Country of origin: China
For turning use
Application |
Material |
Matrix |
Coating |
|||
ISO classification |
Proportion |
(HRA) Hardness |
(GPa) Flexural strength |
Main components |
(µ m) Thickness |
|
(P) Steel |
9008 |
13.9 |
91.0 |
2.5 |
Square columnar Crystal TiCN+AI2O3 |
16 |
P10-P20 |
||||||
9018 |
13.7 |
90.0 |
2.6 |
16 |
||
P20-P30 |
||||||
9028 |
13.5 |
89.0 |
2.6 |
Ultrafine columnar crystal TiCN+AI2O3 |
14 |
|
P30-40 |
Material |
characteristic |
9008 |
Suitable for finishing and semi finishing of carbon steel and alloy steel with better wear resistance than 9018. |
9018 |
Widely used in carbon steel and alloy steel machining. Wide machining range and first choice for steel part machining. |
9028 |
Suitable for carbon steel and alloy steel. Better roughness than 9018 in roughing and gravity cutting under unfavorable conditions. |
6011 |
Ultrafine alloy designation combined with the coating has excellent wear resistance, is suitable for nonferrous metal machining such as aluminum alloy and copper, semi finishing and finishing of cast iron and also can be used for quenched steel machining and is especially good for thread and cutting groove machining. |
6018 |
Designation special for stainless steel machining, ultrafine alloy designation, combined with the coating, have excellent toughness and anti-caking and wear resistance, suitable for stainless steel machining, especially austenitic stainless steel. Also suitable for cutting heat-resistant alloy steel under low speed condition. |
3018 |
The insert has excellent wear resistance and toughness, and is suitable for finishing and semi finishing of ordinary iron and ductile cast iron. |
90 |
Cermet cutter has high hardness and is suitable for semi finishing and finishing of various steel parts and iron casting; It has low affinity with the machining workpiece material and susceptible to build-up edge; Chemical stability is good; Heat resistance and wear resistance are good. |
K10 |
The cutting edge is designed to consider both cutting sharpness and strength. The unique groove profile is designed to effectively reduce the friction between the cutting and the rake face, so that it is more suitable for continuous and intermittent aluminum alloy profiling |
.
Additional information
Aggregate Rating |
---|
Reviews
There are no reviews yet.